189
BCM50a Integrated Router Configuration — Advanced
Chapter 18
Call scheduling
Using call scheduling (applicable only for PPPoA or PPPoE encapsulation), you
can dictate when a remote node is called and for how long.
Introduction
Using the call scheduling feature, the BCM50a Integrated Router can manage a
remote node and dictate when a remote node is called and for how long. This
feature is similar to the scheduler in a video cassette recorder (you can specify a
time period for the VCR to record). You can apply up to 4 schedule sets in Menu
11.1 — Remote Node Profile. From the main menu, enter 26 to access Menu 26
— Schedule Setup as shown in Figure 94.
Figure 94 Menu 26 – Schedule Setup
Menu 26 - Schedule Setup
Schedule Schedule
Set # Name Set # Name
------ ----------------- ------ -----------------
1 AlwaysOn 7 _______________
2 _______________ 8 _______________
3 _______________ 9 _______________
4 _______________ 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Schedule Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel:
To Next Page
Loading...
