190 Chapter 18 Call scheduling
N0115791
Lower numbered sets take precedence over higher numbered sets, thereby
avoiding scheduling conflicts. For example, if sets 1, 2, 3, and 4 are applied in the
remote node then set 1 takes precedence over sets 2, 3, and 4 as the BCM50a
Integrated Router, by default, applies the lowest numbered set first. Set 2 takes
precedence over sets 3 and 4, and so on.
You can design up to 12 schedule sets, but you can only apply up to four schedule
sets for a remote node.
To set up a schedule set, select the schedule set you want to setup from menu 26
(1-12) and press [ENTER] to see Menu 26.1 — Schedule Set Setup as shown in
Figure 95.
Figure 95 Menu 26.1 – Schedule Set Setup
Note: To delete a schedule set, enter the set number and press
[SPACE BAR] and then [ENTER] (or delete) in the Edit Name field.
Menu 26.1 - Schedule Set Setup
Active= Yes
Start Date(yyyy/mm/dd) = 2000 – 01 - 01
How Often= Once
Once:
Date(yyyy/mm/dd)= 2000 – 01 - 01
Weekdays:
Sunday= N/A
Monday= N/A
Tuesday= N/A
Wednesday= N/A
Thursday= N/A
Friday= N/A
Saturday= N/A
Start Time (hh:mm)= 00 : 00
Duration (hh:mm)= 00 : 00
Action= Forced On
Press ENTER to Confirm or ESC to Cancel
To Next Page
Loading...
