Nortel BCM50a - PPP log

Chapter 14 System information and diagnosis 155
BCM50a Integrated Router Configuration — Advanced
PPP log
spo: Source port
dpo: Destination port
Mar 03 10:39:43 202.132.155.97 RAS:
GEN[fffffffffffnordff0080] }S05>R01mF
Mar 03 10:41:29 202.132.155.97 RAS:
GEN[00a0c5f502fnord010080] }S05>R01mF
Mar 03 10:41:34 202.132.155.97 RAS:
IP[Src=192.168.1.33 Dst=202.132.155.93 ICMP]}S04>R01mF
Mar 03 11:59:20 202.132.155.97 RAS:
GEN[00a0c5f502fnord010080] }S05>R01mF
Mar 03 12:00:52 202.132.155.97 RAS:
GEN[ffffffffffff0080] }S05>R01mF
Mar 03 12:00:57 202.132.155.97 RAS:
GEN[00a0c5f502010080] }S05>R01mF
Mar 03 12:01:06 202.132.155.97 RAS:
IP[Src=192.168.1.33 Dst=202.132.155.93 TCP spo=01170 dpo=00021]}S04>R01mF
PPP Log Message Format
SdcmdSyslogSend( SYSLOG_PPPLOG, SYSLOG_NOTICE, String );
String = ppp:Proto Starting / ppp:Proto Opening / ppp:Proto Closing /
ppp:Proto Shutdown
Proto = LCP / ATCP / BACP / BCP / CBCP / CCP / CHAP/ PAP / IPCP /
IPXCP
Jul 19 11:42:44 192.168.102.2 RAS: ppp:LCP Closing
Jul 19 11:42:49 192.168.102.2 RAS: ppp:IPCP Closing
Jul 19 11:42:54 192.168.102.2 RAS: ppp:CCP Closing