Nortel BCM50a - Chapter 13 System security; System security; System password

141
BCM50a Integrated Router Configuration — Advanced
Chapter 13
System security
This chapter describes how to configure the system security on the BCM50a
Integrated Router.
System security
You can configure the system password, an external RADIUS server and 802.1x
in this menu.
System password
Figure 67 Menu 23 – System security
Nortel recommends you change the default password. If you forget your
password, you have to restore the default configuration file. For more
information, see “Restoring the factory-default configuration settings” in
BCM50a Integrated Router Configuration - Basics (N0115790).
Menu 23 - System Security
1. Change Password
2. RADIUS Server
4. IEEE802.1x
Enter Menu Selection Number: