Chapter 4 LAN setup 59
BCM50a Integrated Router Configuration — Advanced
Figure 14 Menu 3.2 – TCP/IP and DHCP Ethernet setup
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server TCP/IP Setup:
Client IP Pool:
Starting Address= 192.168.1.2 IP Address= 192.168.1.1
Size of Client IP Pool= 126 IP Subnet Mask= 255.255.255.0
First DNS Server= From ISP RIP Direction= None
IP Address= N/A Version= N/A
Second DNS Server= From ISP Multicast= None
IP Address= N/A Edit IP Alias= No
Third DNS Server= From ISP
IP Address= N/A
DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Follow the instructions in Table 8 to configure the DHCP fields.
Table 8 DHCP Ethernet setup menu fields
Field Description Example
DHCP This field enables and disables the DHCP server.
If set to Server, your BCM50a Integrated Router will
act as a DHCP server.
If set to None, the DHCP server will be disabled.
Server
Configuration:
Client IP Pool
Starting Address
This field specifies the first of the contiguous
addresses in the IP address pool.
192.168.1.2
To Next Page
Loading...
