Nortel BCM50a - Figure 50 Menu 15.3 - Trigger Port Setup; Table 22 Menu 15.3: Trigger Port Setup Description

112 Chapter 9 Network Address Translation (NAT)
N0115791
Figure 50 Menu 15.3 – Trigger Port Setup
Table 22 describes the fields in Figure 50.
Menu 15.3 - Trigger Port Setup
Incoming Trigger
Rule Name Start Port End Port Start Port End Port
----------------------------------------------------------------------
1. Real Audio 6970 7170 7070 7070
2. 0 0 0 0
3. 0 0 0 0
4. 0 0 0 0
5. 0 0 0 0
6. 0 0 0 0
7. 0 0 0 0
8. 0 0 0 0
9. 0 0 0 0
10. 0 0 0 0
11. 0 0 0 0
12. 0 0 0 0
Press ENTER to Confirm or ESC to Cancel:
Table 22 Menu 15.3: Trigger Port setup description
Field Description Example
Rule This is the rule index number. 1
Name Enter a unique name for identification purposes. You can enter
up to 15 characters in this field. All characters are permitted -
including spaces.
Real
Audio
Incoming Incoming is a port (or a range of ports) that a server on the WAN uses when
it sends out a particular service. The BCM50a Integrated Router forwards the
traffic with this port (or range of ports) to the client computer on the LAN that
requested the service.
Start Port Enter a port number or the starting port number in a range of
port numbers.
6970
End Port Enter a port number or the ending port number in a range of port
numbers.
7170