Nortel BCM50a - Page 251

Appendix G Command Interpreter 251
BCM50a Integrated Router Configuration — Advanced
status <iface>
Displays an interface’s IP Address Resolution
Protocol status.
attpret <on|off>
Allows or disallows the device to receive ARP
from a different network or not.
force <on|off>
Enables or disables the ARP timeout function.
dhcp <iface>
client
release
Releases the DHCP client IP address.
renew
Renews the DHCP client IP address.
status [option]
Displays the DHCP status.
dns
query address <ip
address>
Displays the domain name of an IP address.
name <host name>
Displays the IP address of a domain name.
system
Configures the system DNS server settings.
display
Shows the system DNS server settings.
edit <0: first|1:
second|2: third>
<0:from
ISP|1:usr-def|2:n
one> [IP addr
ess if choosing
1]
Configures the system DNS server settings.
lan edit <0: first|1:
second|2: third>
<0:from
ISP|1:usr-def|2:D
NS Relay|3: n
one> [IP address
if choosing 1]
Configures the LAN DNS server settings.
display
Shows the LAN DNS server settings.
httpd debug [on|off]
Enables or disables the HTTP debug flag.
This command currently does not work.
icmp
status
Displays the ICMP statistics counter.
discovery <iface> [on|off]
Sets the ICMP router discovery flag.
Table 59 IP commands
Command Description