270 Appendix G Command Interpreter
N0115791
<borrow
on|off>
The class can borrow
bandwidth from its parent
class when borrowing is
turned on, and vice versa.
del #
Deletes the class # and its
filter and all its children
classes and their filters in LAN.
mod # <bandwidth
xxx>
Modifies the parameters of the
class in the LAN. A bandwidth
value is optional.
<name xxx>
Sets the class name.
<priority x>
Sets the class priority. The
range is between 0 (the
lowest) to 7 (the highest). The
priority is unchanged if you do
not set a new value.
<borrow
on|off>
The class can borrow
bandwidth from its parent
class when borrowing is
turned on, and vice versa.
wan add # bandwidth xxx <name xxx>
Adds a class with bandwidth
xxx b/s in WAN. The name is
for your information.
<priority
x>
Sets the class priority. The
range is between 0 (the
lowest) to 7 (the highest).
<borrow
on|off>
The class can borrow
bandwidth from its parent
class when borrowing is
turned on, and vice versa.
del #
Deletes the class # and its
filter and all its children class
and their filters in WAN.
mod # <bandwidth
xxx>
Modifies the parameters of the
class in the WAN. A bandwidth
value is optional.
<name xxx>
Sets the class name.
<priority x>
Sets the class priority. The
range is between 0 (the
lowest) to 7 (the highest).
Table 63 Bandwidth management commands
Command Description
To Next Page
Loading...
