Nortel BCM50a - Page 63

Chapter 4 LAN setup 63
BCM50a Integrated Router Configuration — Advanced
RIP Direction Press [SPACE BAR] and then [ENTER] to
select the RIP direction. Options are
Both, In Only, Out Only or None.
None
Version Press [SPACE BAR] and then [ENTER] to
select the RIP version. Options are
RIP-1, RIP-2B or RIP-2M.
RIP-1
Incoming Protocol
Filters
Enter the filter sets you wish to apply to the
incoming traffic between this node and the
BCM50a Integrated Router.
1
Outgoing Protocol
Filters
Enter the filter sets you wish to apply to the
outgoing traffic between this node and the
BCM50a Integrated Router.
2
Table 10 IP Alias setup menu field
Field Description Example