Installation
1040-0011 Revision 16
4 INSTALLATION
4.1 STORAGE AND OPERATION ENVIRONMENT
4.1.1 Important
In order to avoid damage or destruction of mechanical components or the electronic hardware,
review the following warnings during the design phase, installation and commissioning:
The electronic hardware contains semiconductor components that are sensitive to electrostatic
discharge (ESD). Improper handling can severely damage the electronic hardware. Read Paragraph
4.1.2 for details on proper handling.
Protect the SMC from mechanical stress, humidity, dust, and thermal damage. Storage temperature
is -20° C to +60° C. Operating temperature is 15 to 40° C.
The SMC is designed for installation in any convenient location in a system. Remote
connection/programming and download control is achieved via an Ethernet connection.
4.1.2 Electrical ESD safety
The ScanMaster Controller is sensitive to ESD. Handle it with care; improper handling can damage to
these electronics
To Next Page
Loading...