Appendix C – SMC-LSR-02 SPI Laser Adapter
1040-0011 Revision 73
7 APPENDIX C – SMC-LSR-02 SPI LASER ADAPTER
7.1 INTRODUCTION
The SPI Laser Adapter provides convenient connectivity from the SMC Laser Connector (J18) to the
68-pin High-density Connector used by SPI Lasers on their G3 and G4 models.
The SPI Laser Adapter has the following features:
• Direct plug-in to the SMC Laser Connector (J18)
Note: Remote connection is available in an alternate configuration.
• Access to the SPI Laser interlock signals
• Signaling support for the SPI G3/G4 fiber laser families via the 68-pin High-density Connector.
To Next Page
Loading...