Novanta ScanMaster - Connector JP6 (E-STOP) Pinouts

Appendix B - SMC-LSR-01 IPG Laser Adapter
1040-0011 Revision 70
Note: Connect the cut GRN wire attached to the 25P D-SUB pin 13 to the cut YEL wire attached to
the 50P connector pin 24. E-STOP connector J6 should be used to access the laser AStop
(ESTOP_LOOP) and Reset (ESTOP2_LOOP) signals for laser enabling and fault reset.
Connector JP6 (E-STOP) Pinouts