Novanta ScanMaster - Serial RS-232 Signal Pinouts (Connector J10); Connector J10 (RS-232) Pinouts; Connector J3 (+24 Signal) Signal Descriptions; Connector J10 (RS-232) Signal Descriptions

Installation
1040-0011 Revision 25
Connector J3 (+24 Signal) Signal Descriptions
Pins 1 – 2
+24V
Customer optical isolator supply
1
GND
Digital ground reference
2
4.5.2 Serial RS-232 Signal Pinouts (Connector J10)
The following figure contains the pinout drawing for Connector J10 (RS-232).
Note: This pinout does not match the 10-pin serial header pinout of all PC motherboards.
Connector J10 (RS-232) Pinouts
The following table contains a full description of the signal for each pin in the J10 Connector.
Connector J10 (RS-232) Signal Descriptions
Odd-numbered Pins (1 – 9)
Even-numbered Pins (2 – 10)
N/C
Reserved for future use
1
2
N/C
Reserved for future use