Oce 3165 - Printing Finished Reports; Using Covers

118 Océ 3165 User Manual
Printing finished reports
When you use the Océ 3165 printer driver, you can print a ready to distribute
report with one simple print command.
You can for example combine double-sided printing with stapling, covers and
a binding setting and print a document in booklet form or calendar form.
Above mentioned settings are gathered on the ‘Main’ and ‘Layout’ tab of the
Océ 3165 printer driver.
Note: When using the Océ 3165 PPD, only main functionality of the Océ 3165
will be offered to you. It might be possible you will not find all settings which
are described here.
Using covers
The Océ 3165 can provide either a front or a back cover, or both a front and a
back cover during the printing process. If none of these options is selected in
the print command window, prints will be delivered without covers.
The paper tray to be used for the cover sheets is determined by the copier
configuration, set by the key operator. The paper tray to be used for the rest of
the document must be specified by the ‘Paper tray’ setting within the Paper
Source box.
Note: Tray 4 is commonly used for the body pages of the print job (only A4
paper).
When selecting covers, the first and/or last page of your document are printed
on cover material.
▼ Printing a document with covers
1
From the File menu of your application, select the option ‘Print’.
You are now in the print window of the application.
Note: Do not enter the required number of copies in this window.
2 Click ‘OK’ (or ‘Print’).
The Océ 3165 printer window appears
3 Enter the required number of copies.