Oce 3165 - Default Settings of Océ 3165 Printer Drivers

176 Océ 3165 User Manual
Default settings of Océ 3165 printer
drivers
When setting up the printer driver, settings can be reset to their default value,
being the factory settings of the driver, defined by Océ. There are also some
differences between the Océ 3165 PostScript and PCL5 printer driver. Some
settings which are described in this manual, may not be available in the PCL5
printer driver and vice versa.
Factory settings of Océ 3165
printer drivers
PostScript
printer driver
PCL5
printer driver
Main tab
- Copies 11
- To mailbox not selected not selected
- Security not selected not selected
- 1-sided or 2-sided As in document As in document
- Staple As in document As in document
- Covers not selected not selected
- Paper source Paper tray - Automatic Paper tray - Automatic
Lay out tab
- Paper size A4 210 x 297 mm A4 210 x 297 mm
- Scale 100 percent not applicable
- Image (mirror, negative) not selected not applicable
- Orientation Portrait Portrait
- Binding edge Long side Long side
- Margin shift Front 0 mm, back 0 mm Front 0 mm, back 0 mm
Quality tab
- Halftone medium medium
- Graphics mode not applicable HPGL2
Output tab
- Print method To printer To printer
- Output tray Automatic Automatic
- Banner page Automatic Automatic
- Font substitution see fonts tab Use printer fonts
for all True Type fonts