Oce 3165 - Opening the Setup Window

88 Océ 3165 User Manual
Reset Océ default settings Having customized the printer driver, settings can
be reset to their default value, being the factory settings as defined by Océ (see
‘Default settings of Océ 3165 printer drivers’ on page 176 for an overview).
Resetting the Océ defaults is only possible in the setup window and can be
done for each separate group of settings (presented on one tab).
Opening the setup window
To standardize settings of your print window, you need to open the setup
window of the printer driver which is available in the Control Panel of your
Windows system.
Note: For a temporary setup, you can also open the setup window of your
application (see ‘Storing a document in your mailbox’ on page 107).
▼ Displaying the setup window in Windows 3.x
1
Open the Main Group in the Program Manager.
2 Open the Control Panel.
3 Double click the printers icon and double click the Setup button.
▼ Displaying the setup window in Windows 95 and NT4.0
1
Click and hold the Start button.
2 Select and hold the option Settings.
3 Select the option Printers (and release the button). The Printers window
appears.
4 Select the printers icon.
5 Pull down the ‘File’ menu and select ‘Properties’ (when working with
Windows 95) or ‘Document Defaults’ (when working with Windows NT4).
Note: Select ‘Properties’ to set up PS fonts for Windows NT 4.0.
Settings
Setup window
PCL5
printer driver
Print window
PCL5
printer driver
Setup window
PostScript
printer driver
Print window
PostScript
printer driver
Paper size yes no yes no
Scale - - yes no
Orientation yes no yes no
Print method yes no yes no
Font settings yes
no yes no
Halftone setting yes no yes yes
Graphics mode yes no - -
[43]