78 Océ 3165 User Manual
The End User License Agreement windows pops up.
9 Check the acceptance box to continue installation of the printer driver and
click ‘Next’. The Ready to Start Copying window appears.
10 Press ‘Finish’ to continue the installation.
Installation will start and a progress bar will inform you on the status of the
installation.
11 If requested, enter your User, Host and Group name (which will be used for job
identification and copy charges) and click the ‘OK’ button.
Note: A file named “o3165r2.ini” will be added to the Windows directory
which contains your User name, Group name and Host name. If this file
already exists (because you have installed the driver on this PC before), the
fields contain data saved in the above file. The file data can be changed by
entering amendments.
12 The message ‘Installation successful’ appears. If not, contact your system
administrator.
13 Click ‘Documents Defaults’ to set up the printer driver,
click ‘Printer Properties’ to set up the fonts,
click ‘Restart Windows now’ or
click ‘Exit to Windows’ to finish installation.
Note: For details about set up options, click the ‘Help’ button in the driver
window or refer to ‘Setting up the Océ 3165 printer driver’ on page 87.
Installing the Océ 3165 PPD (PS only)
If your printer has a PostScript interpreter and no Océ 3165 printer driver is
available for your system, use the PPD file (see the table on page 73).
A PPD (PostScript Printer Description) file contains printer-specific
information and can only be used in combination with a PostScript printer
driver. When this PPD file is added to a standard PostScript printer driver,
which is available on the different operating systems, printer-specific
information is added to this printer driver. When you install the PPD software
you configure the standard PostScript printer driver to a Océ 3165 printer
driver in which the main features of the Océ 3165 are available. Where to find
the different features depends on the lay-out of the standard printer driver of
your operating system.
If you have a Windows 95 or NT4 environment, you could decide to install the
standard PostScript printer driver and the Océ 3165 PPD file because the
standard Windows PostScript driver may offer settings which may be
important to you.
To Next Page
Loading...
