Oce 3165 - Page 144

144 Océ 3165 User Manual
The Add Printer Wizard appears.
8 Click the ‘My Computer’option.
9 Click the ‘Next’ button.
The Available ports box appears.
10 Select the port you want the printer to connect to.
Note: The selected port must be the same as the one selected for the
Océ 3165 printer driver.
11 Click the ‘Next’ button.
The Manufacturer and Printer box appears.
12 Click the ‘Have Disk’ button.
The Install From Disk window appears.
13 Enter in the ‘Manufacturer’s file from’ entry box A:\NT40. Click the ‘OK’
button.
14 Click the ‘Next’ button.
15 Type in the printer name, the default setting is Océ Job SubmitIT.
16 Select the option ‘Yes’ to set the new printer as default and click the ‘Next’
button.
17 Select the option ‘No’ to avoid printing a test page (this option is not available
at the moment).
18 Click the ‘Not Shared’ option.
19 Click the ‘Next’ button.
20 Click the ‘Finish’ button.
The Copying Files window appears on which you can follow the progress of
copying the files.
Note: If required change the printer port using the Properties button.
21 Close the Printer window. The Océ 3165 JobSubmitIT printer driver is now
ready for use.
Functionality of the printer driver is also explained in the on-line help. When
you click the ‘Help’ button the Océ 3165 Help Contents window appears. The
on-line help is described more detailed in chapter 4.