30 Océ 3165 User Manual
▼ Copying and printing using a PIN code
1
Enter your PIN code using the copy quantity buttons. Each time you enter a
number, one bullet is filled to show how many digits have been entered. Your
PIN code is not displayed.
Note: If you make a mistake while entering your PIN code, press the
‘Correction’ button (C) and enter your PIN code again.
2 If the PIN code you entered corresponds with an existing account, the message
‘Ready to copy’ appears on the display. Also the selected account number is
shown. You can now make your copies, which will be booked on this account.
Note: When an inaccessible account is selected, a message appears which
indicates that the selected account is locked. Contact the key operator for
more information.
3 Once the job is completed, press the correction button to return the standard
settings.
4 Then press the correction button once more to deselect the account.
The message “Enter your PIN code” is shown again and the Océ 3165 is no
longer available for use.
See also chapter 5, ‘Basic print jobs’ on page 99 for more information on
printing jobs while using a PIN code.
To Next Page
Loading...
