Oce 3165 - Page 80

80 Océ 3165 User Manual
The Océ 3165 printer driver is now ready for use.
25 Move the icon of the floppy disk to the trash can to remove it from the drive.
▼ Installing the Océ 3165 PPD in Windows NT3.5x
1
Login to the network and start windows NT 3.5x.
2 Make sure all applications are closed.
3 Insert the disk in your disk drive (A:)
4 Go to the Program Manager window.
5 Double click the Main icon (often available in the Main group). The Main
window appears.
6 Double click the Print Manager icon in the Main window. The Print Manager
window appears.
7 Click and hold the Printer option in the menu bar.
8 Select the Create Printer option (release the button). The Create Printer
window appears.
9 In the Printer Name box, enter the name you want to give to this printer.
10 Select in the Driver list box the option ‘Other’ (you can find this at the bottom
of this list). The Install Driver window appears.
11 Enter the path A:\NT35 and click the ‘OK’ button.
The Select Driver window appears.
12 Click the ‘OK’ button. The Windows NT Setup window appears.
13 In this window enter the following line: D:\i386.
Note: The CD-ROM drive can be other than D. Use the drive character that
is used for your CD-ROM drive.
14 Insert the Windows NT 3.5x CD-ROM in the CD-ROM drive.
15 Click the ‘Continue’ button. A Windows NT 3.5x setup window appears, on
which you can follow the progress of copying the files.
16 After a few seconds the Create Printer window appears again.
17 Enter in the ‘Description’ entry box any description you want to give to this
printer.
18 Select in the ‘Print to’ list box the option ‘Other’ (you can find this at the
bottom of this list). The Print Destinations window appears.
19 Select ‘Local Port’ and click the ‘OK’ button. The port name window appears.
20 In the ‘Enter a Port Name’ entry box type the printer name (ask your system
administrator for details).
21 Click the ‘OK’ button. The Create Printer window appears again.
Note: Sometimes a Local Port warning window appears. If so ignore the
warning and click the ‘OK’ button. The Create Printer window appears
again. Select in the ‘Print to’ list box the printer name as in step 18.
22 Click the ‘OK’ button. The Postscript Printer Setup window appears.
23 Click the ‘OK’ button. The Print Manager window reappears, with a window
for the printer that has been installed.