Oce 3165 - Page 82

82 Océ 3165 User Manual
6 Select the option ‘Printers’ (and release the button). The Printers window
appears.
7 Double click the ‘Add Printer’ icon. The ‘Add Printer Wizard’ window
appears.
8 Select the option ‘Network printer server’.
9 Click the ‘Next’ button.
10 In the ‘Connect to Printer’ window either select the required printer from the
‘Shared Printer’ or type the correct printer path in the ‘Printer’ box (ask your
system administrator, see note at the beginning of this installation procedure).
11 Click the OK button. A message about a IBMNULL driver appears.
12 Ignore the message and click the ‘OK’ button. The ‘Add Printer Wizard’
window appears again.
13 Click the ‘Have Disk’ button. The ‘Install From Disk’ window appears.
14 In the ‘Copy Manufacturer's File From’ entry box enter the following line:
“A:\NT40”.
15 Click the ‘OK’ button. The ‘Add Printer Wizard’ window appears again with
“Océ 3165 Network Copier” in the printers box.
16 Click ‘OK’ once more. The ‘Connect to Printer - Copying Files’ window
appears on which you can follow the progress of copying files.
17 Some Windows system files may be missing. If so, after a few seconds the
Insert Disk message window appears. If not, continue with step 21.
18 Ignore this message and click the ‘OK’ button. The ‘Files Needed’ window
appears.
19 In the ‘Copy Files From’ entry box enter the following line: D:i386.
Note: The CD-ROM can be other than D. Use the drive letter that is used
for your CD-ROM drive.
20 Click the ‘OK’ button. The ‘Connect to Printers - Copying Files’ window
appears again on which you can follow the progress of copying files.
21 After a few seconds the ‘Add Printer Wizard’ window appears again.
22 Click the ‘Finish’ button. The ‘Printers’ window appears again. The printer
driver is now ready for use.