Configuration: Using AdminManager Standard Setup • 44
SNTP Tab (Oki Device Setup)
Item Comments
Use SNTP Enable/disable SNTP (Simple Network Time
Protocol).
NTP Server 1
Address
Set the IP address or host name for NTP Server 1.
NTP Server 2
Address
Set the IP address or host name for NTP Server 2.
Adjust Interval Set the interval for sending time update requests to
the server. Select 1 hour (the default), 12 hours or
24 hours.
Local Time Zone Set the local time zone from -12:00 to +13:00.
Minute interval is selectable from 00 (the default),
15, 30 or 45.
Daylight Saving When this is selected, one hour is added to the
local time.
To Next Page
Loading...
Need help?
General
