Oki C9600hdn Configuration Guide

Configuration: Configurable Items • 85
Port-4
Set an appropriate command sequence to be sent to the connected
printer after printing a job. Combination of alphanumeric characters
and the following control characters, up to a maximum of 31
characters:
• \b Backspace (0x08)
• \t Tab (0x09)
• \n Linefeed (0x0a)
• \v Vertical tab (0x0b)
• \f Page feed (0x0c)
• \r Carriage return (0x0d)
• \xnn Hex code [nn] (0xnn)
• \] Double quote (0x22)
• \\ Back slash (0x5c).
Port-5
Set an appropriate command sequence to be sent to the connected
printer before printing a job when data is sent to the sjis/euc logical
printer/directory. Combination of alphanumeric characters and the
following control characters, up to a maximum of 31 characters:
• \b Backspace (0x08)
• \t Tab (0x09)
• \n Linefeed (0x0a)
• \v Vertical tab (0x0b)
• \f Page feed (0x0c)
• \r Carriage return (0x0d)
• \xnn Hex code [nn] (0xnn)
AdminManager
Not applicable.
Web Browser
Not applicable.
TELNET
[Setup printer port] → [EOJ string]

Oki C9600hdn Specifications

General

Brand	Oki
Model	C9600hdn
Category	Printer
Language	English