44871001TH Rev.6
4-42
Oki Data CONFIDENTIAL
4.REPLACEMENT OF PARTS
(10) Remove eight screws (Silver) to detach the Plate Bracket (CU) .
(11) Remove the screw (Silver, L=8mm)
, and remove core .
(12) Remove four screws (Silver)
, and remove the Plate Base (PWU)
with to slide
along to the arrow in figure.
⑨
⑨
⑨
⑩
Clamp together the screw and
the FG-Film.
⑧
⑫
⑪
(9) Remove three screws (Silver) to detach the Duct Fan Power .
Air
Craw
(7) Remove the PWR unit-ACDC Switch. (Refer to 4.2.4)
(8) Unlatch the claws (2 portions), and remove the Motor-FAN (60 x 25) from the Duct
Fan Power
.
⑩
⑨
⑨
⑨
⑨
To Next Page
Loading...
