Oki MB461 - Page 151

Oki Data CONFIDENTIAL
44871001TH Rev.6
5-14
5. Lubricating point
④
44912501PA Frame-Assy-Hopping-ADF
SF-133 Class C
Apply a normal amount of HANARL
(SF-133) to the hatching area.
(All circumference of shaft)
Leave it for about 3minutes (drying time) after painting HANARL SF-133, and then
assemble the roller.
Portion G
Portion H
Portion J
Portion G
EM-30LP Class B
Apply a normal amount of MOLYKOTE
(EM-30LP) to the hatched area.
(Boss-Coupling and Gear-Feed-Z21
sliding surfaces)
Gear-Feed-Z21
Boss-Coupling