Oki MB461 - Page 209

Oki Data CONFIDENTIAL
44871001TH Rev.6
8-17
8. TROUBLESHOOTING PROCEDURES
No. Category
PJL Status
Code
Error Warning Description
11 Warning 1601x
x: Tray #
1
2
3
4
5
%TRAY% Empty
Please see Help for details.
%TRAY%: The tray
is empty. Treated as
Warning until printing
to the empty tray is
designated.
%TRAY%
Tray1
Tray2
12 Warning 1090x 1
2
3
4
5
%TRAY% missing.
Please see Help for details.
Indicates that paper trays
are not installed.
%TRAY%
Tray1
Tray2
13 Warning 10814 1
2
3
4
5
Accounting Log Buffer is near full.
Please see Help for details.
It indicates the Job
Accounting log buffer is
near full.
14 Warning 10787 1
2
3
4
5
Accounting Log Buffer Full (Delete
old logs)
The function isn't
accepted because log
buffer is full. (Related to
JobAccount).
This message is
displayed, if the log buffer
is full and "Operation
at Log Full" in Job
Accounting Server
Software is set to "Delete
old logs".
The new jobs will be
able to execute after the
following operations.
1. The log in the unit must
be got by Job Accounting
Server Software.
2. The setting of
"Operation at Log Full"
must be changed to
"Does not acquire logs".
No. Category
PJL Status
Code
Error Warning Description
15 Warning 10071(K) 1
2
3
4
5
Please check %COLOR% Toner
Cartridge.
Please see Help for details.
Something is wrong with
the toner sensor during
printing.
%COLOR%
K
16 Warning 10756 1
2
3
4
5
Wait Timeout is disabled.
If your printer is connected to USB
port, it may become unable to print
a job without via the USB port.
Indicates that Print
Timeout is disabled.
17 Warning 30928 1
2
3
4
5
PDF Cache Write Error
Close
Notifies that writing a
PDF file to the cache has
failed.
When an SD card is not
used, add memory or an
SD card.
When an SD card is used,
increase free space on
the SD card.
18 Warning 10758 1
2
3
4
5
It was not possible to communicate
with the SNTP server.
Notifies that the system
has attempted to obtain
the current time from the
SNTP server and failed.
19 Warning 10962 1
2
3
4
5
Printer Life
20 Warning - 1
2
3
4
5
System received LOCK signal.
Close
Panel lock signal
(Disable) is recognized
during copy job
movement, and a warning
message is displayed.