Oki MB461 - Page 59

Oki Data CONFIDENTIAL
44871001TH Rev.6
3-8
3. MFP INSTALLATION
(12) Lift the image drum from printer.
Note!
•
Donotexposeimagedrumtolightformorethan5minutes
 •
Donottouchshinygreensurfaceatbottomofimagedrum.
(13) Remove the silica gel pack before installation.
(14) Reinstall the image drum in the printer:lower it into place in the printer locating the
pegs
❶
at each end into their slots in the sides of the printer cavity
❷
.
(15) Turn the lever in the direction shown.
•
The arrow on the lever should align with the arrow on the image drum.
•
Whenthetonercartridgeisnotfullyxed,adeclineinprintqualitymayoccur.
(16) Close the top cover.
(17) Close the scanner unit.
Reference! Please refer to "Loading Paper" P.3-9 for information on how to load
paper into the machine
2