Oki Data CONFIDENTIAL
44871001TH Rev.6
3-9
3. MFP INSTALLATION
Loading Paper in Tray 1 and Tray 2
The following procedure explains how to load
paper in tray 1 or tray 2 (optional).
Memo! The following procedure uses tray 1 as an example but the same is applied
to tray 2.
(1) Pull out the paper tray.
(2) Slide the paper guide (1) to the width of paper to be loaded.
(3) Slide the paper stopper (2) to the length of paper to be loaded.
Paper guide
Paper stopper
(4) Flex paper back and forth, and then fan it. Straighten the edges of the paper stack
on a level surface.
To Next Page
Loading...
