Olympus OER-Pro - Page 139

Chapter 4 Reprocessing Operations
133
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
AUTOMATIC PRINTING (Prints the reprocessing records
automatically)
• “Reprocessing Result” is the record provided for a completed
reprocessing process. For the printed information about
“Reprocessing Results”, refer to “PRINT FORMAT
(Reprocessing Result)” on page 145.
• “Error Result” is the record provided when an error is
encountered during a reprocessing process, which result in
an incomplete reprocessing process. For the printed
information about “Error Results”, refer to “PRINT FORMAT
(Error Result)” on page 146.
• The print function can print completed reprocessing cycles or
error codes that occur during the reprocessing cycle. It
cannot print the record of completed/incomplete
sub-independent processes and the record of error occurred
during the standby operation. For details on the print function
of error result, see Table 4.6.
Description
Subjects of printout
Reprocessing
Results
Error Results
Prints the latest reprocessing
record automatically.
1
 –

can be printed as standard function
–
can be printed as optional function
2
Table 4.5
1 For setting of “AUTOMATIC PRINTING”, refer to Section 6.11, “Print
function setup” on page 180.
2 For setting of Error Result Printout, refer to Section 6.11, “Print function
setup” on page 180.