132
Chapter 4 Reprocessing Operations
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
• To avoid damage to or deterioration of the printout, do not
allow the paper to make contact with the following:
Alcohol or detergent
Oil, fat, organic solvents, or chemicals (medical, industrial
or cosmetic)
Stamp ink
Water
Materials containing plasticizer (PVC film, desk mat,
leather products, journal cover, etc.)
Certain stationery (plastic tape, mending tape,
fluorescent-ink pen, oil-ink pen, adhesives other than
starchy paste)
• To prevent discoloration of unused paper, store the printer
paper roll without opening in a place meeting the following
conditions.
Dark, cool place
Not exposed to NOx (nitrogen oxide(s)), SOx (sulfur
oxide(s)), or O
3 (ozone)
• To prevent discoloration of paper after printing, store it in a
place meeting the following conditions. If it is required to
store the printed results for a month or more, it is
recommended to copy the information printed on the paper to
durable sheets and store the copies.
Dark, cool place
Not exposed to NOx, SOx, or O
3 (ozone)
• When red lines appear on both sides of the printer paper roll
during printing, replace the printer paper roll.
To Next Page
Loading...
