Chapter 4 Reprocessing Operations
139
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
PRINT TODAY (Prints all of the reprocessing records
recorded that day)
• “Reprocessing Result” is the record provided for a completed
reprocessing process. For the printed information about
“Reprocessing Results”, refer to “PRINT FORMAT
(Reprocessing Result)” on page 145.
• “Error Result” is the record provided when an error is
encountered during a reprocessing process, which result in
an incomplete reprocessing process. For the printed
information about “Error Results”, refer to “PRINT FORMAT
(Error Result)” on page 146.
• The print function can print completed reprocessing cycles or
error codes that occur during the reprocessing cycle. It
cannot print the record of completed/incomplete
sub-independent processes and the record of error occurred
during the standby operation. For details on the print function
of error result, see Table 4.10.
Description of function
Subjects of printout
Reprocessing
Results
Error Results
Prints all of the reprocessing
records recorded that day by
manual operation of subcontrol
panel.
–
can be printed as standard function
–
can be printed as optional function
1
Table 4.9
1 For setting of Error Result Printout, refer to Section 6.11, “Print function
setup” on page 180.
To Next Page
Loading...
