140
Chapter 4 Reprocessing Operations
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
1. Press the FUNC SEL button on the subcontrol panel to select “PRINT
TODAY”.
2. Press the FUNC START button on the subcontrol panel. The printer prints
the results of the day’s reprocessing events in reverse order, beginning with
the most recent.
Only the results of successfully completed reprocessing
events are printed. The results of processes that were
aborted due to an error code are not printed out.
Figure 4.55
3. The buzzer beeps and paper feed stops when printing is finished. Cut the
printed part of paper and ensure that information is printed correctly.
Print Option
Error occurred
during reprocessing
cycle
Error occurred when
starting
reprocessing cycle
(ex. E12, E31, E91)
Error occurred when
in standby
Error occurred
during
sub-independent
process
AUTOMATIC
PRINTING
–––
PRINT LAST
––
PRINT TODAY
–––
PRINT ALL
–––
Print option can print out the
subject error result
–
Print option cannot print out the
subject error result
Table 4.10
To Next Page
Loading...
