Omron E5CSV - Page 88

5.8 Initial Setting Level (5)
5-25
Parameters
SP mode
Alarm 2 ON delay
Alarm 2 function is prevented from turning ON until after the delay time set in this parameter has
elapsed.
• Set the time for which the ON delay is to be enabled.
• To disable the ON delay, set 0.
Parameter
Setting
range
Unit
Default
Alarm 2 ON delay 0 to 999 Second 0
* This parameter is displayed regardless of the output assignment
setting.
ALM mode
Alarm 2 OFF delay
Alarm 2 function is prevented from turning OFF until after the delay time set in this parameter has
elapsed.
• Set the time for which the OFF delay is to be enabled.
• To disable the OFF delay, set 0.
Parameter
Setting
range
Unit
Default
Alarm 2 OFF delay 0 to 999 Second 0
* This parameter is displayed regardless of the output assignment
setting.
Function
Setting
Function
Setting