Omron E5CSV User Manual

Parameter Operation Lists
A-9
Appendices
■ Initial Setting Level (1)
Parameters
Mode
indicators/
displayed
text
Setting (monitor) value Default Unit
Set
value
0: No PV auto reset
SP mode
100’s digit
1: Yes
0 None
PV/SP display
Tuning selection
0 ST/AT
1 ST
2
PV→SP
AT
3 ST/AT
4 ST
5
SP→PV
AT
6 ST/AT
7 ST
8
No PV display
AT
PV/SP display
Tuning selection
SP mode
10’s digit
9 PV→SP ST/AT
0 None
ST executing
display
Manual reset
enable/
disable
Control period
selection
0 2/20 (s)
1
Disabled
6/60
2 2/20
3
Enabled
Enabled
6/60
4 2/20
5
Disabled
6/60
6 2/20
7
Disabled
Enabled
6/60
8 2/20
ST executing display
Manual reset
enable/disable
Control period selection
SP mode
1’s digit
9
Enabled Disabled
6/60
0 None
Integral time setting unit
ALM mode
100’s digit
0: Second
1: Minute
0 None
0: 0% FS
1: 0.05% FS
2: 0.1% FS
3: 0.2% FS
4: 0.3% FS
5: 0.5% FS
6: 0.75% FS
7: 1% FS
8: 1.5% FS
Hysteresis width
ALM mode
10’s digit
9: 2% FS
3
*1
None
0: 0% FS
1: ±0.1% FS
2: ±0.25% FS
3: ±0.5% FS
4: ±0.75% FS
5: ±1% FS
6: ±1.25% FS
7: ±1.5% FS
8: ±1.75% FS
Temperature width in
which the deviation
indicator lights
ALM mode
1’s digit
9: ±2% FS
5
*2
None
ST stable range IS mode 1 to 999
15 °C/°F
*1. The default is 2, however, for multi-input (thermocouple/platinum resistance thermometer) models.
*2. The default is 2, however, for multi-input (thermocouple/platinum resistance thermometer) models.

Omron E5CSV Specifications

General

Brand	Omron
Model	E5CSV
Category	Temperature Controller
Language	English