Omron K3HB-H - Page 108

Functions and Operations
5.11 Adjusting Timing Inputs
5-35
D Use the U [UP] and S [SHIFT] Keys
to set the timing hold parameter.
E Press the M [MODE] Key several times
to switch the PV display to “on-t.”
F Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
G Use the U [UP] and S [SHIFT] Keys
to change the ON timing delay time.
• Units: ms for the K3HB-S,
100 ms for the K3HB-X/V/H
H Press the M [MODE] Key to switch the
PV display to the next parameter “off-
t.”
• The parameter “on-t” is registered.
I Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
J Use the U [UP] and S [SHIFT] Keys
to change the timing delay.
• Units: ms for the K3HB-S,
100 ms for the K3HB-X/V/H
K Press the M [MODE] Key to switch to
the next parameter.
• The set value is registered.
L Press the L [LEVEL] Key for at least
1 s to return to RUN level.
1 s min.
SU
tmg-h
p-h
L 1
M
on-t
0
L 1
S
on-t
0000
L 1
SU
on-t
0020
L 1
M
off-t
0
L 1
S
off-t
0000
L 1
SU
off-t
0010
L 1
M
z-lim
off
L 1
L
123. 4
123. 4