Omron K3HB-H - Page 160

Functions and Operations
5.34 Using the Position Meter
5-87
J Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
K Use the U [UP] and S [SHIFT] Keys
to change the position meter lower limit
setting.
L Press the M [MODE] Key to switch to
the next parameter.
• The parameter for the position meter
lower limit is registered.
M Press the L [LEVEL] Key for at least
1 s to return to RUN level.
1 s min.
S
-19999
L 2
pos-l
SU
pos-l
-10000
L 2
M
sv. dsp
off
L 2
L
123. 4
123. 4