Omron K3HB-H - Page 21

Outline
Section 1 Outline
1-4
Display
Other
Display value selection Display color selection Display refresh period
The current display value can
be selected from the present
value, the maximum value,
and the minimum value.
→ P.5-78
The PV display color can be
set to either green or red. The
present value color can be
switched according to the
status of comparative outputs.
→ P.5-83
When inputs change quickly,
the display refresh period can
be delayed to reduce
flickering and make the
display easier to read.
→ P.5-73
Position meter Scaling Comparative set value display
Displays the current
measurement value as a position
in relation to the scaling width on
a meter with 20 sections.
→ P.5-85
Can convert the input signal to
any display value.
→ P.5-14
The comparative set value
can be set to not display
during operation.
→ P.5-82
Decimal point display
Disables displaying numerals
the decimal point in
measurement values.
→ P.5-93
Max/Min hold Bank selection Bank copy
Holds the maximum and
minimum measurement
values.
→ P.5-54
Eight comparative set value
banks can be selected using
the keys on the front of the
Unit or by external inputs.
Groups of comparative set
values can be set and can be
selected as groups.
→ P.5-93
Any bank setting can be
copied to all banks.
→ P.5-98
Cold junction
compensation
User calibration Power interruption memory
Enables or disables terminal
temperature compensation.
→ P.5-31
Allows the user to calibrate the
K3HB.
→ P. 6 - 1
Enables recording the
maximum and minimum
values when power is
interrupted.
→ P.5-75
X V S
H
X V S
H
X V S
H
X V S
H
X V S X V S
H
H
X V S
H
X V S
H
X V S
H
H
X V S
H
X V S
H