Omron K3HB-H - Page 52

Basic Application Methods
Basic Application Methods
3.4 Temperature Monitoring/Control with Multi-level Output
3-13
Input Adjustment Level
(L 1)
Display Adjustment Level
( L 2 )
✽ Other parameters are set to their default values.
Parameter Characters Set value Remarks
Timing hold tmg-h nomal Normal
Parameter Characters Set value Remarks
Display value
selection
disp pv
Present value
Position
meter type
pos-t ic
Incremental display
Position
meter upper
limit
pos-h 1400.
0
Full-scale
0.0
°C to 1400.0°C
Position
meter lower
limit
pos-l 0
Decimal point
position
pvdp on Display numbers below
the decimal point.