Functions and Operations
Knowledge Required for Setting Parameters
5-3
To change a parameter, move to the level where that parameter is
found. The current level is shown on the bank/level display when
moving between levels.
Level/bank
display
Level
L p Protect level
Not lit or
B 0 to 7 RUN level (Lights only when banks are used.)
L a Adjustment level
L 0 Initial setting level
L1 Input adjustment level
L 2 Display adjustment level
L 4 Comparative set value level
L 5 Linear output level
L 6 Communications setting level
L t Output test level
L f Advanced function setting level
To Next Page
Loading...
