Omron K3HB-H - Page 77

Functions and Operations
Section 5 Functions and Operations
5-4
■ Moving between Levels
To Protect Level Press the L [LEVEL] and M [MODE] Keys in RUN level for at least
1 s. The PV display will start to flash. Press the same keys for at least
2 s to move to protect level. Press the L [LEVEL] and M [MODE]
Keys for at least 1 s to return to RUN level.
To Adjustment Level Press the L [LEVEL] Key in RUN level once (less than 1 s). The level
will change to adjustment level when the key is released.
Use the same operation to return from adjustment level to RUN level.
To Initial Setting Level Press the L [LEVEL] Key in RUN or adjustment level for at least 1 s.
The PV display will start to flash. Press the L [LEVEL] Key for at least
2 s to move to the initial setting level. Press the L [LEVEL] Key for at
least 1 s to return to the RUN level from the initial setting level.
Input Adjustment Level,
Display Adjustment Level,
Comparative Set Value
Level, Linear Output Level,
Communications Setting
Level, Output Test Level
First, move to initial setting level. Press the L [LEVEL] Key in initial
setting level (less than 1 s) each time to move to the next level. Move
to the next level from the output test level to return to the initial setting
level.
RUN
Protect
Advanced function
setting
L
Less than
1 s
L
3 s min.
L
1 s min.
L+M
1 s min.
Always displayed, regardless of model or settings.
May not be displayed, depending on the model or
settings.
Power ON
L+M
3 s min.
Measurement starts.
Measurement stops.
Adjustment
L
Less than 1 s
Input
adjustment
Initialization
Display
adjustment
L
Less than 1 s
Output test
L
Less than 1 s
L
Less than 1 s
L
Less than 1 s
L
Less than 1 s
L
Less than 1 s
L
1 s min.
Comparative
set value
Level transitions:
Communications
settings
Linear output
Password