Omron K3HB - Page 137

Appendices
Parameter list
A-7
Parameter list
Enter the set value before using.
Level Parameter name Display Setting range Initial
value
Unit Set
value
Protect
L
p
RUN/adjustment protect run.pt 0 to 20
Setting level protect set.pt 0 to 21
Setting change protect wt.pt off, on off
Forced-zero protect zr.pt off, on off
Run
Measurement value --19999 to 99999 ---
Measurement value/
comparative set value HH
--19999 to 99999 99999
Measurement value/
comparative set value H
--19999 to 99999 99999
Measurement value/
comparative set value L
--19999 to 99999 -19999
Measurement value/
comparative set value LL
--19999 to 99999 -19999
Adjustment
L
a
Bank bank 0 to 70
Initial
setting
L
0
Calculation cal 0, 1, 2, 3, 4, 5, 6, 70
Input type A in-ta 0-20, 4-20, 0-5,
1-5, 5, 10
4-20
Scaling input value A1 inp.
a1-19999 to 99999 4. 000
Scaling display value A1 dsp.
a1-19999 to 99999 4000
Scaling input value A2 inp.
a2 -19999 to 99999 20. 000
Scaling display value A2 dsp.
a2 -19999 to 99999 20000
Input type B in-tb 0-20, 4-20, 0-5,
1-5, 5, 10
4-20
Scaling input value B1 inp.b1 -19999 to 99999 4.
000
Scaling display value B1 dsp.b1 -19999 to 99999 4000
Scaling input value B2 inp.b2 -19999 to 99999 20.
000
Scaling display value B2 dsp.b2 -19999 to 99999 20000
Constant K k-19999 to 99999 0
Decimal point position dp ,,,,,, ,,,,.,,
,,,.,,, ,,.,,,,
,.,,,,
,,.,,,
Comparative output
pattern
out-p nomal, zone, le?el nomal
Move to the advanced-
function setting level
amo? -19999 to 99999 0