Functions and Operations
Section 5 Functions and Operations
5-56
Setting the present measurement value to a reference value of "0"
(forced-zero) → P.5-53
H Press the M[MODE] Key to switch to
the next parameter.
• The set value is registered.
I Press the L[LEVEL] Key for at least 1
s to return to the initial setting level.
1 s min.
J Press the L[LEVEL] Key for at least 1
s to return to RUN level.
1 s min.
M
z-trm
off
L
f
L
cal
0
L
0
L
123. 4
123. 4
Remarks
To Next Page
Loading...
