Omron M1 Series - Page 198

Parameter
No.
Function name Monitor or Data Range
Default
data
Setting
during
RUN
Unit
W20
Transport Time for Specified
Length
0.00 to 99990 min
999.9 - min
W21 Power Consumption Monitor
0.00 to 9999 kW
0 - kW
W22 Motor Output Power Monitor
0.00 to 9999kW
0 - kW
W23 Load Rate Monitor
-999 to 999
0 - %
W24 Torque Current Monitor
-999 to 999
0 - %
W25 Output Current Monitor
0.0 to 3276.7 A
0 - A
W26 Magnetic Flux Command Value
-999 to 999
0 - %
W27 Timed Operation Remaining Time
0 to 9999 s
0 - s
W28 RUN Command Source Monitor
0 to 23
0 - -
W29
Frequency and PID Command
Source Monitor
0 to 39
0 - -
W30 Speed in Percentage
0.00 to 100.00
0 - %
W31 Speed Set Value in Percentage
0.00 to 100.00
0 - %
4 Parameter List
4-32
M1 Series Standard Type User's Manual (I669)