Omron OS32C Series User Manual

74
Chapter3
OS32C
User’s Manual
Basic Operation of Configuration Software
Fig. 3-71 Send to Sensor
12. Follow the prompt to reset the OS32C. Now configuration is complete.
- Safety and warning zones must be configured so that they maintain a distance of 100mm from the wall or fixtures.
- While executing the [Sculpting] command, a warning zone cannot be set with the range exceeding 10 meters. Use [Edit
Zones] or [Convert Shape To] command to modify the shape of the warning zone.

Omron OS32C Series Specifications

General

Brand	Omron
Model	OS32C Series
Category	Scanner
Language	English