Omron Sysmac NJ-series User Manual

13 SNMP Agent
13-8
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
ifLastChange (9) RO
The sysUpTime (in 0.01seconds) at the last
change in ifOperStatus for this interface.
Sup-
ported.
According to the
standard.
ifInOctets (10) RO
The number of octets received through this inter-
face. This includes framing characters.
Sup-
ported.
According to the
standard.
ifInUcastPkts (11) RO
The number of unicast packets reported to a
higher level protocol.
Sup-
ported.
According to the
standard.
ifInNUcastPkts (12) RO
The number of non-unicast packets (broadcast or
multicast packets) reported to a higher level proto-
col.
Sup-
ported.
According to the
standard.
ifInDiscards (13) RO
The number of packets that had no errors but
could not be passed to a higher level protocol (i.e.,
the number of packets received but discarded due
to a buffer overflow).
Sup-
ported.
According to the
standard.
ifInErrors (14) RO
The number of packets discarded because they
contained errors.
Sup-
ported.
According to the
standard.
ifInUnknown
Protos
(15) RO
The number of packets received, but discarded
because they were of an illegal or unsupported
protocol.
For example, Ethernet packets did not have IP set
for the field that identifies their higher level proto-
col.
Sup-
ported.
According to the
standard.
ifOutOctets (16) RO
The number of octets of packets sent through this
interface.
This includes framing characters.
Sup-
ported.
According to the
standard.
ifOutUcast
Pkts
(17) RO
The number of unicast packets sent by higher
level protocols.
This includes discarded packets and unsent pack-
ets.
Sup-
ported.
According to the
standard.
ifOutNUcast
Pkts
(18) RO
The number of non-unicast packets sent by higher
level protocols.
This includes discarded packets and unsent pack-
ets.
Sup-
ported.
According to the
standard.
ifOutDiscards (19) RO
The number of packets that had no errors but
were discarded in the sending process (due to a
send buffer overflow, etc.).
Sup-
ported.
According to the
standard.
ifOutErrors (20) RO
The number of packets that could not be sent
because of an error.
Sup-
po
rted
.
According to the
standard.
ifOutQLen (21) RO
The size of the send packet queue (i.e., the num-
ber of packets).
Sup-
ported.
Always 0.
Subtree name Standard [(identifier) attribute] Support
Implementation
specifications

Omron Sysmac NJ-series Specifications

General

Brand	Omron
Model	Sysmac NJ-series
Category	Computer Hardware
Language	English