Omron Sysmac NJ-series - Page 397

13-13
13 SNMP Agent
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
13-1 SNMP Agent
13
13-1-4 MIB Specifications
ipRouteProto (9) RO
This is the routing mechanism used to determine
routes. Some values correspond to gateway rout-
ing protocols, but be aware that the host may not
support those protocols.
Other (1): Other than the following items.
Local (2): A route set on the local machine.
Netmgmt (3): A route set by network manage-
ment.
Icmp (4): A route set by an ICMP redirect or
some other ICMP function.
Egp (5): EGP
The following are gateway protocols:
Ggp (6): GGP
Hello (7): HELLO
Rip (8): RIP
is-is (9)
es-is (10)
ciscolgrp (11)
bbnSpflgp (12)
ospf (13): OSPF
bgp (14)
Sup-
ported.
According to the
standard.
ipRouteAge (10) RW
The elapsed time since this route was updated (in
seconds).
Sup-
ported.
Always 0.
ipRouteMask (11) RW
The subnet mask value in relation to ipRouteDest.
On systems that do not support a custom subnet
mask value, this value is based on the address
class of the ipRouteDest field. If ipRouteDest is
0.0.0.0, this value is also 0.0.0.0.
Sup-
ported.
According to the
standard.
ipRouteMetric5 (12) RW
The alternative routing metric.
Sup-
ported.
According to the
standard.
ipRouteInfo (13) RO
The MIB object ID for the routing protocol used by
this route. If not defined, set to {0.0}.
Sup-
ported.
0.0
Subtree name Standard [(identifier) attribute] Support
Implementation
specifications