EasyManua.ls Logo

Omron Sysmac NJ-series

Omron Sysmac NJ-series
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15 Troubleshooting
15-50
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
Event name FTP Server Started Event code 940A0000 hex
Meaning The FTP agent started normally.
Source EtherNet/IP Function Module Source details FTP Detection
timing
At power ON or
Controller reset
Error attributes Level Information Recovery --- Log category System
Effects User program Continues. Operation Not affected.
Indicators EtherNet/IP NET RUN EtherNet/IP NET ERR EtherNet/IP LINK/ACT
--- --- ---
System-defined
variables
Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Correction Prevention
The FTP agent started normally. --- ---
Attached
information
None
Precautions/
Remarks
None
Event name NTP Client Started Event code 940B0000 hex
Meaning The NTP client started normally and a request for the NTP server to obtain the time started.
Source EtherNet/IP Function Module Source details NTP Detection
timing
At power ON or
Controller reset
Error attributes Level Information Recovery --- Log category System
Effects User program Continues. Operation Not affected.
Indicators EtherNet/IP NET RUN EtherNet/IP NET ERR EtherNet/IP LINK/ACT
--- --- ---
System-defined
variables
Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Correction Prevention
The NTP client started normally and a
request for the NTP server to obtain
the time started.
--- ---
Attached
information
None
Precautions/
Remarks
None
Event name SNMP Started Event code 940C0000 hex
Meaning The SNMP agent started normally.
Source EtherNet/IP Function Module Source details SNMP Detection
timing
At power ON or
Controller reset
Error attributes Level Information Recovery --- Log category System
Effects User program Continues. Operation Not affected.
Indicators EtherNet/IP NET RUN EtherNet/IP NET ERR EtherNet/IP LINK/ACT
--- --- ---
System-defined
variables
Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Correction Prevention
The SNMP agent started normally. --- ---
Attached
information
None
Precautions/
Remarks
None

Table of Contents

Other manuals for Omron Sysmac NJ-series

Related product manuals