Omron ZX Series User Manual

Initial Display Section 4-2
111
4-2 Initial Display
When the power is turned ON and initialization has been finished, the dis-
play will appear as follows:
The Amplifier Unit model is displayed on the top, and then the channel
number is displayed.
The software version is displayed on the bottom, and then the normal
operation display appears 3 seconds later.

Omron ZX Series Specifications

General

Power Supply Voltage	12 to 24 VDC ±10%
Protection Rating	IP67
Output Type	NPN or PNP
Protection Circuit	Reverse polarity protection, short-circuit protection
Operating Temperature	-25 to 55°C (-13 to 131°F)