Omron ZX Series User Manual

FUN (Function) Mode Section 4-5
134
4-5-8 Initializing Settings
This function resets all settings to their default values.
n Procedure
Set the mode switch to FUN and select
“InIt” on the main display.
Press the ENT Key for 3 seconds or
longer.
“InIt” will be displayed on the main dis-
play and “
⎯⎯” will be displayed on
the sub-display for 3 seconds.
RUN T FUN
After 3 seconds, “OK” will be displayed
on the sub-display to complete the ini-
tialization process.
Press the ENT Key for 3
seconds.

Omron ZX Series Specifications

General

Power Supply Voltage	12 to 24 VDC ±10%
Protection Rating	IP67
Output Type	NPN or PNP
Protection Circuit	Reverse polarity protection, short-circuit protection
Operating Temperature	-25 to 55°C (-13 to 131°F)