Omron ZX Series User Manual

FUN (Function) Mode Section 4-5
138
4-5-12 Other Special FUN Mode Settings
The following “other” items can be set when or is selected
in the special FUN mode settings
Settings for
non-measurement
Zero reset memory
function
Gain setting
Output value held
Current: About 23 mA
Voltage: Clamped at
about 5.5 V (fix
ed)
Go to the next
mode.
Enabled
Disabled
Black mode
White mode
Metal mode
Auto (See note.)
Note: This function can be set only for a
Reflective Sensor.

Omron ZX Series Specifications

General

Power Supply Voltage	12 to 24 VDC ±10%
Protection Rating	IP67
Output Type	NPN or PNP
Protection Circuit	Reverse polarity protection, short-circuit protection
Operating Temperature	-25 to 55°C (-13 to 131°F)